One of the most effective methods to speed up your computer is to upgrade to an SSD. Because of the advancements in technology in recent years, more and more individuals are opting to utilize solid-state drives (SSDs) rather than hard disc drives (HDDs) as the primary storage device for their computers.
Indeed, SSDs are far quicker, thinner, and much quieter than traditional hard drives, bulkier and louder.
Now the question arises that.
How to install SSD as the primary drive?
It is unnecessary to be a computer genius to understand how to make your SSD the central boot disc for your Windows 10 PC. In addition, it should be something that many people can accomplish at home, provided they do so with caution.
As SSDs become more affordable to the general population, it was only logical for Microsoft to make it simple to set the SSD as your primary boot disc. In this article, I will give you detailed ways to install your SSD.
Should I use an SSD as my primary drive?
Unless you have some very bizarre use habits, a solid-state drive (SSD) will do, and it is this drive you should utilize as your primary (boot) drive and the drive from which you should launch apps.
if you are involved in video editing or if you utilize a scratch drive
How do I make my SSD my primary drive, Windows 10?
First and foremost, when you have physically fitted the SSD, you must restart your computer to ensure that it is operational.
Hopefully, you will be able to activate your SSD in BIOS after restarting your computer and doing the following steps: Press the keys F2, F8, F11, and DEL to enter BIOS > Select Setup > Turn on or activate the SSD > Save and leave the BIOS configuration.
How to make SSD boot drive
To enter BIOS, restart the computer and hit the F2/F12/Del keys.
Change the boot order by selecting the boot option and selecting the new SSD as the first boot device.
Save your modifications, leave the BIOS, and restart your computer. Wait patiently for the computer to begin to power up.
How to change boot drive to SSD windows 10
To assist you in changing the boot order/sequence of your SSD, follow the instructions outlined below:
- To access BIOS setup while your computer is still starting up, use the F2/Del key on your keyboard.
- Next, modify the boot order/sequence, and make your cloned SSD the first boot drive on the system.
- Finally, save the changes you’ve made.
How to change primary hard drive windows 10?
- Open the Settings app by clicking Start, then Settings (the gear symbol) from the Start menu.
- Select System from the drop-down menu.
- Select the Storage option from the drop-down menu.
- Change the location where new content is saved by clicking the Change Where New Content Is Saved link.
- Select the disc you wish to be the default location for app installations from the New Apps Will Save To selection.
How to install SSD as primary drive?
If your BIOS supports AHCI or ACPI, you should configure your controller accordingly. Make the SSD the first hard disc drive in the Hard Disk Drive Priority list if your BIOS allows it.
Then, set the DVD Drive to be the first boot order in the different Boot Order Option. Finally, reboot your computer and follow the steps in the operating system setup.
What to do after installing new SSD
After installing SSD, follow the steps:
1.Keep your receipt as evidence of purchase.
SSDs are typically protected by a warranty that lasts between three and five years from the date of purchase. Because it is not possible to log in and submit an invoice from motherboard or video card manufacturers to extend the warranty.
It is essential to retain the evidence of purchase on hand (invoices, receipts, electronic invoices, etc.). Because the loss of the proof of purchase, the warranty duration will be extended to the ex-factory date, resulting in a loss of more than a week from the original warranty period. Don’t forget to safeguard your legal rights and interests as well.
2.Remove the SSD from its packaging.
Unpacking an SSD box requires the use of a few tricks. Typically, both 2.5″ SATA and M.2 PCIe drives are packaged in a blister, with the M.2 SSD being particularly vulnerable since it is thinner and more delicate than the memory and may break in half if unpacked too forcefully.
Therefore, yanking SSD out of the blistering force, it is advised that you push SSD out of the blister.
3.Confirm the location of the installation.
M.2 PCIe has an entirely different interface than 2.5″ SSD, and the connection points for these two types of drives are located in completely separate positions on the motherboard.
The SATA interface is supported by 2.5″ SSDs, and these devices need different power and SATA connections.
There’s nothing more irritating than always having to reorganize your computer’s cable management system. Thus the M.2 is a godsend for me as an editor.
It is sufficient to plug and secure the M.2 onto the motherboard to decrease the number of cords used by two. The M.2 ports are located on the motherboard and are locked in place using three to four M.2 slots and three to five screws.
4.Making use of the drive as a system disc.
Insert the USB flash drive with the Windows installation software into the computer’s USB port and press DELETE to enter the BIOS configuration mode.
First, examine to see whether the computer system recognizes the freshly inserted SSD and UFD. Then go to BOOT, move the UFD to the first position, adjust the newly inserted hard drive to the second position, press F10 to save the adjustments, and exit the BIOS screen.
Assuming the changes are completed in the order specified above, the machine should automatically reboot after leaving the BIOS and boot into the Ready to Install Windows screen.
Before installing Windows, you must format the SSD. The capacity may be divided when formatting has been completed.
When you partition your hard disc, you’ll get two local drives: C: and D. They’re referred to as C: and D: purposes in the common vocabulary.
You may set up two hard drives to save money: one with less capacity and the other with more. You should strive to put most of your software on the bigger D drive if you have a restricted budget.
The C drive should be kept as basic as possible. However, the disadvantage of using a single hard drive is that data may be lost if the hard drive fails, so be sure to create an online cloud backup before you start using it.
Purchase a lower capacity SSD for use as the boot drive (C:) and a bigger capacity SSD for use as a data drive, if your budget allows it (D:).
There is no requirement for partitioning in this case, and you may have two hard drives in two distinct movements without having to partition one of them.
Also, if the boot drive is not functioning correctly, you don’t have to be concerned about the data stored on the data disc.
5.Using it just as a data storage medium.
If you only wish to increase the storage capacity of a hard disc, you may skip the preceding step.
Alternatively, Please keep in mind that even after installing and booting into Windows, you will not see the new drive since the hard disc has not been formatted and hence cannot be used immediately.
Disk Management is the following option to choose. It should be shown as “Disk 0” on your computer’s screen, and your freshly inserted SSD should be displayed as “Disk 1” on your computer’s screen, as seen in the screenshot above.
The select format from the context menu by right-clicking on a blank region of Disk 1. NTFS is the most used file system format.
Press OK, and the system will automatically begin formatting your drive for you. Once the formatting is complete, you will view your new campaign on your local workstation.
6.Test the speed to see whether it’s up to par with the industry average
Nowadays, SSD manufacturers on the market list the read/write speed of their SSDs on their websites and the packaging of their products.
The unspoken norm is that the speed manufacturers labelled are the more excellent value of data they can measure, instead of the speed manufacturers branded as faster.
As a result, you will obtain results from your home test that are somewhat lower than the results from the lab but not significantly lower than the results from the lab.
With luck, you’ll also receive a speedier SSD in the package. Indeed, even when using the same controller and Flash IC, the results may not always be the same.
To test SSDs, many people use the following applications. As a first step, you should check whether the Sequential speed (also known as Sequential read/write speed) is the same as stated.
If it is, proceed. As a starting point, let’s look at the Crystal Disk Mark (CDM) programme, which is the most widely used.
With its high accuracy in performance testing, this programe is widely utilized by both manufacturers and reviewers.
It is also relatively quick when it comes to delivering new information to customers. To make use of it, click on All in the top left.
The AS SSD Benchmark is the next test, which is often featured in evaluations.
In addition to checking the read/write performance, this tool allows you to switch to IOPS data from the View on the top location, an unusual feature in this industry. It is straightforward to use; just hit the Start button at the bottom and wait a few moments.
How do I install an SSD as a secondary hard drive?
- Remove the power cord from your computer and open the case.
- Locate a free disc bay on your computer.
- Remove the drive caddy and insert your new solid-state drive (SSD) into it.
- Replacing the caddy in the drive bay should be straightforward.
- Locate a free SATA data cable port on your motherboard and connect a SATA data cable to it using the provided instructions.
How do I transfer my OS from HDD to SSD?
Once the old disc has been reduced to a manageable size, you may begin transferring the information to the new SSD:
- Select “Clone” from the left-hand sidebar of Ease US Todo backup once it has been opened.
- Choose your old disc as the clone source and the SSD as the destination place.
- Click on the Clone button to begin.
How to install SSD and HDD together
Using SSD and HDD together on a laptop or PC may seem to be a complicated process to do, but with the correct tools in hand, you can complete it in a matter of minutes by following a few straightforward procedures.
Here is a list of the best solutions that can assist you in utilizing SSD and HDD together in your laptop or desktop computer to their full potential!
1.Make use of an SSD as a boot drive.
If you want to utilize an SSD and an HDD together, consider using the SSD as the boot drive. The Windows operating system is one of the essential items that must be retained on the SSD in this case.
When you install your operating system on an SSD, it will accelerate all aspects of Windows, including launching apps, booting up, and shutting down your computer.
2.Keep personal information on a hard drive.
If you have acquired a low-capacity SSD owing to the high cost of the device, you might consider using this method! Because an SSD that is wholly loaded will not function properly, keeping all of your data on a hard drive is always recommended.
As a result, you may want to consider supporting personal data and files such as videos, music, movies, photographs, and other such items on a hard drive that is only sometimes utilized.
Conclusion
Making your SSD your main drive shouldn’t be too difficult, as long as you have a good grasp of how to utilize SSD and HDD together.
Well, using SSD and HDD together has several advantages, but you can get the most out of them only if you follow the guidelines outlined above. For the most part, you don’t even need technical expertise to figure things out.
All you have to do now is make sure that you follow the directions carefully so that you can take advantage of the lightning-fast capabilities of your new SSD drive.
I hope you now have a good knowledge of how to install SSD as primary drive.
Read more-How To Make Windows Taskbar Transparent
