If you want to know How to Connect Skullcandy Wireless Headphones, you are in the right place.
Connecting a new Skullcandy wireless headphones to your device is a bit challenging, especially around the first time.
Many Skullcandy crusher and Skullcandy crusher wireless users have been having a tough time.
Thus we have got this article for you that lists the whole process.
How To Pair Skullcandy Wireless Earbuds
Activate Pairing Mode:
Like most headphones, Skullcandy headphones have a few buttons on the side for navigation. One of these is the power button. Often this button acts as the Bluetooth pairing button as well.
Simply press and hold this button for ⅘ seconds. Once the pairing mode is activated, the LED will start flashing.
Discover The Headphone On Your Device:
Now you need to activate the headphone on your device, be it a phone, laptop, or any other Bluetooth-enabled device. So, make sure your device is visible.
If your Bluetooth device is not visible, your headphones won’t be able to connect with them. If all goes well, the headphone will appear on the list of available Bluetooth devices.
The method of pairing varies slightly amongst Android, iOS, and Windows. Let’s check out how.
Android: Go to the settings, activate Bluetooth, and choose the Pair New Device option. Select the Skullcandy device, and you are done.
iOS: The process is similar to pairing with Android. Go to Bluetooth, search for Other Devices and select it.
Windows 10: If it’s your laptop, click on the Bluetooth button in the toolbar and select Show Bluetooth Devices. Then select the Bluetooth and Others Devices and the Skullcandy headphones to pair.
If you cannot locate the Bluetooth button in your toolbar, reach the taskbar at the far end of the display screen, select the upward arrow, and follow the steps mentioned.
You can also use the Windows search box option to discover Bluetooth. Once there, locate the Skullcandy headphones and click on Connect.
Mac OS: To connect the headphones to Mac, reach the Apple menu on your Mac, select System Preferences and Bluetooth, identify the Skullcandy headphones, and click on Connect.
Read More : EASY WAY TO FIX ERROR CODE 124 PARAMOUNT PLUS
Confirm the pairing process:
The steps mentioned above answer your question about how to connect Skullcandy wireless headphones in detail.
However, it’s advisable to confirm that the pairing process is complete. If the pairing process is successful, the Skullcandy headphones will either beep, or the LED will stop blinking.
So, if you don’t hear the beep sound or the light does not stop blinking, your Bluetooth may not have connected with the device successfully. So go back and repeat the process.
The Skullcandy earbuds are quite popular amongst users for their comfortable fit. However, the problem is they don’t breast very easily.
However, that should not stop you from purchasing these sets. This section will cover the resetting part of your favorite Skullcandy earbuds.
Here is the process to follow:
- Switch off the Bluetooth of your smart device and forget the Skullcandy earbuds from the drop-down list of your Bluetooth menu.
- Take out the earbuds from the charging case and turn them on manually
- Press the power button of each earbud for 6-7 seconds
- If they are not powered off, power them off
- Once they are shut, hold the two power buttons for ten seconds, and your earbud is reset
To check if the process was successful, put the earbuds back in the charging case. If the LED light is red, pull them out of the case. This will turn on both the earbuds, and they will start to blink in Blue. This shows your earbud was reset successfully.
Frequently Asked Questions
1. Why Are My Skullcandy Earbuds Not Pairing?
If your Skullcandy earbuds don’t pair after you choose them from your Bluetooth drop-down list, it’s best to forget the Method Active in your device.
Turn on the Method Active off and on to enter the pairing mode. You can also choose Method Active in your Bluetooth settings.
2. How Do I Pair My Skullcandy Wireless Earbuds With My IPhone?
For starters, place your earbuds in pairing mode. The process is different for each Skullcandy earbud. Once paired, follow the instructions.
We have listed the process of a few popular options here:
Sesh the wireless: Remove the earbuds from the case and place them back. This will turn on the red lights. Close the charging case and open the lid once more to remove the earbuds. Your device will get in the pairing mode.
Indy True Wireless: Remove the earbuds from the charging case and put them back. This will cause the red lights to blink. Close the charging case and open the lid once again. Your device will be paired.
Push Active True Wireless: Take out both the earbuds from the case, ensuring they are turned off. Now press and hold the left primary function button on the earbud for seven seconds. Your earbuds will begin to flash, showing they are in pairing mode.
Grind True Wireless: To pair, you need to open the charging case with both earbuds. This will automatically turn on the pairing mode.
Mod True Wireless: Get the Skullcandy earbuds out of the case and place them back. Your earbuds will turn red. Now remove the earbuds from the case and connect to your device.
3. How Do I Pair Both Of My Skullcandy Earbuds?
The process to sync the earbuds is as follows:
- Place the buds back into the case till both the LEDs start showing red. Once it’s achieved, pull them back
- Both the buds will be powered on automatically, and the LED will start to flash blue and white while syncing
- You will hear a tone if the syncing process is successful, and only the left bud will begin to flash Red/Blue
In this post, we have covered all that you need to know on connect Skullcandy wireless headphones, and the same applies to the Skullcandy crusher. We hope you have no further problems in using your Skullcandy headphones with ease.
Guide On : HOW TO RETURN YOUR SPECTRUM EQUIPMENT IN EASY STEPS
