Air compressors are a crucial piece of any dental office. Selecting the right compressor will be a pioneer in your dental care because choosing poorly will endanger harm to your patients. A compressor should provide the best air quality. The Australian based companies offer the best dental compressors with the quality of performance in hygiene and are also leading in the market.
This makes it difficult for business owners not to know what to look for in a dental compressor. It is significant to choose the right one for both business and patient benefits. The compressor is thought of only when buying or when it needs immediate attention. The criteria that rarely lead to choosing a quality product in the dental compressor are purchase price and quick availability. There are other considerations by which a dental compressor is chosen.
- Sizing your compressor
You need to know the capacity and air consumption of the compressor to size it properly. Consumption is determined depending upon the operatories in use at a time. The suppliers simplify all this and tell how many users will support a compressor. You must check the actual flow and duty cycle to make sure you are getting what you want. The percentage of time by which a compressor can run without cooling off is “duty cycle”.
For example, the duty cycle of some compressors is 30%. This does not mean it can run for 10 hours, but likely 18minutes in an hour. The duty cycle varies widely, so ask your supplier properly about it before purchasing.
- Air quality
The air quality depends on the inlet air. Both lubricated and oil-less compressors are used in dentistry and they require particular filters to remove dust or dirt. The system must include coalescing filters in a lubricated compressor to ensure the safety of patients. The dental compressors like membrane and desiccant include a dryer to remove moisture. Consider the factor of how much-compressed air is needed for the purge while selecting a compressor.
- Not all compressors are created equal
The quality of compressors varies widely because of the choices made by manufacturers in design and materials to meet the target price. Following are some points to consider while comparing compressors.
The heads should be of good quality and designed in a way to remove heat. The important features are filters, cooling fans, and finned cylinders. The components should be created in a way to be serviced and not replaced.
Other features of quality include fittings, robust tubing, and also good vibration isolation to prevent loose fittings and wires. The electrical connections should be touch-proof for safety. The compressors must have UL certification in dental offices, and the storage tank should be ASME certified.
- Power
The power rating for the pump is specific for every compressor which is used to compress air. There is a wide range of power requirements for pumps. You will be able to power for longer if the pump is stronger. The dental offices will need one to four horsepower to run all their equipment. If you want to power more tools, the compressor should be strong enough.
- Pressure
Every dental tool has a specific pressure requirement. The pressure is measured in the BAR. When the compressor is powering multiple stations, the value of the BAR needs to be higher than the minimum to ensure you have got enough pressure.
